Hinge properly fixed
I obtained some more deck paint this week so the main aim was to finish painting the non slip areas of the deck, the two remaining areas were given a good sanding and a wash down then allowed to dry which did not take long this weather then after masking up the two remaining areas I applied a good coat of deck paint and then removed the masking tape.
Port aft deck painted
Deck in the anchor well painted
I finished up the week by making another attempt at removing the masking tape from the port side deck, this was the area where I didn't remove the tape straight away and it had really stuck, however while I had been away the elements have been helping so I got most of the tape off it has just left the glue behind which seems to respond to acetone, that will be next weeks priority so as to get the deck complete.
I have made a little more progress on the bilge access hatch for the heads I managed to get a coat of epoxy on the top this weekend I hope to epoxy the bottom so that I can start applying the fake teak.
No comments:
Post a Comment